Long-lasting protection for reels, rods and tackle
Cerakote offers professional anglers and manufacturers a ceramic-based thin-film coating that protects fishing gear from the extreme conditions on the water. The proprietary technology outperforms conventional surface treatments and significantly extends the lifespan of fishing reels, rods, and other equipment. Fishing gear is constantly exposed to aggressive environmental conditions – be it corrosive saltwater when sea fishing or mechanical stress from intensive use. Conventional coatings such as anodizing, powder coating, or factory paints often fail in terms of corrosion, abrasion, and color fastness. Cerakote was developed to eliminate precisely these weaknesses. The ceramic polymer coating forms an extremely durable protective layer that adheres to almost any substrate while maintaining a minimal film thickness. This means no noticeable weight increase with maximum performance. Professional anglers use Cerakote for the restoration and maintenance of their high-quality equipment, while manufacturers rely on its superior durability and color consistency. With hundreds of individual color options and almost unlimited design possibilities, Cerakote combines technical peak performance with individual personalization.
Performance Characteristics of Cerakote Coatings
Cerakote ceramic coatings offer a range of superior properties for various applications in fishing & fishing equipment.
Abrasion and Scratch Resistant
Military certification guarantees maximum resistance to mechanical wear, scratches, and abrasion from intensive use.
Color selection and durability
With over 100 different colours, there are no limits to creativity. And the best part: even after the wildest performances, the colour remains as it should be.
Corrosion Resistance
Unrivalled protection against saltwater, moisture, and aggressive environmental influences – your fishing gear remains rust-free even under the toughest conditions.
Chemical Resistance
Resistance to detergents, oils, fuels, and other aggressive chemicals protects the coating and extends the lifespan of the fishing rods and fishing equipment.
Hydrophobic Properties
The water-repellent property of Cerakote coatings prevents water accumulation, reduces drying times, and significantly minimizes the risk of corrosion.
Thin-film ceramic coating
The minimal layer thickness of just 6-50 µm means no additional weight with full protective performance and compatibility – even with very small tolerances. Ideal for precise fishing reels and sensitive rod components.
Applications in Fishing & Fishing Equipment
Cerakote ceramic coatings can be used for various solutions, including:
Fishing Reel Protection
Complete protection for housings, coils and mechanical components against saltwater corrosion and wear, while also allowing for custom colors.
Rod Guide Coating
Optimized line glide due to low friction coefficient, reduced wear, and extended service life of the sensitive guide rings.
Tackle Box Equipment
Protection for tools, pliers, knives, and other accessories against corrosion and wear – all small parts remain functional and ready for use.
Boat and Marine Equipment
Coating for boat components, brackets, and marine hardware offers protection against UV radiation, saltwater, and mechanical stress.
Premium fishing tackle with superior surface quality
Cerakote offers manufacturers a high-performance ceramic coating that adheres to almost all surfaces, such as aluminum, stainless steel, titanium, carbon fiber, polymers, and many more. Decisive advantage: absolute color consistency across different substrates and production runs – unlike anodizing.
Silky smooth running
The performance of modern fishing reels directly depends on minimizing friction. Cerakote acts as a permanent dry lubricant here, drastically reducing the coefficient of friction compared to bare metals or standard coatings. Gears, spool shafts, and line rollers thus glide with minimal resistance, eliminating energy loss during cranking. This "silky-smooth" operation remains consistent even under high load, as no lubricant film can break. The result: a more direct lure feel, more precise fighting behavior without jerking, and significantly optimized casting distances due to free-running spool bearings.
Extreme Durability
Cerakote's Elite Series redefines durability: With extreme hardness, it protects against abrasive media like sand and salt without adding bulk. The microscopically thin layer thickness of only 13–28 µm guarantees that even the tightest mechanical tolerances remain precise and require no reprocessing. Unlike oils, which wash off, this protection is permanently bonded to the substrate and cannot flake off. The result is low-maintenance equipment whose technical integrity and value are fully preserved even after years of harsh use in saltwater.
Advantages over other coating systems
Cerakote surpasses anodizing, powder coating, and paint-based factory coatings in all relevant performance parameters. While anodizing is only applicable to aluminum and yields inconsistent color results, Cerakote adheres to almost all substrates with perfect color consistency. Powder coatings are significantly thicker and can impair mechanical tolerances, whereas Cerakote's thin-film technology causes no dimensional changes. Its corrosion resistance even surpasses specialized marine coatings, which typically last only 1-2 seasons, while Cerakote, when applied correctly, protects for years. Traditional paints offer no anti-seize properties and tend to chip, especially at edges and on moving parts. Cerakote's chemical resistance allows cleaning with aggressive agents without surface damage – a crucial advantage for saltwater removal. Its abrasion resistance meets military standards and outlasts other coatings many times over.
Conclusion: Cerakote – The Ultimate Choice for Demanding Anglers
For anglers who demand maximum longevity and reliability from their equipment, Cerakote is the only coating solution that makes no compromises. The combination of superior corrosion resistance, extreme abrasion resistance, and practical properties such as a hydrophobic surface and low friction makes Cerakote the most technologically advanced coating on the market. While conventional surface treatments fail in the extreme conditions on the water, Cerakote offers multi-year protection without performance loss. The investment in Cerakote coating pays for itself through extended equipment life, reduced maintenance costs, and more reliable performance. With hundreds of color options and unlimited customization possibilities, Cerakote combines technical excellence with personal style – so you can spend more time fishing and less time battling equipment problems.
-
Vendor:CERAKOTEF-123 | Burnt Orange
Regular price From €0,20Sale price From €0,20 Regular priceUnit price €330,51 per l -
Vendor:CERAKOTEE-100 | Blackout
Regular price From €0,20Sale price From €0,20 Regular priceUnit price €330,51 per l -
Vendor:CERAKOTEC-241 | O.D. Green
Regular price From €0,20Sale price From €0,20 Regular priceUnit price €330,51 per l -
Vendor:CERAKOTEH-256 | Desert Verde
Regular price From €0,20Sale price From €0,20 Regular priceUnit price €330,51 per l -
Vendor:CERAKOTEH-248 | Forest Green
Regular price From €0,20Sale price From €0,20 Regular priceUnit price €330,51 per l -
Vendor:CERAKOTEC-189 | Blue Titanium
Regular price From €0,20Sale price From €0,20 Regular priceUnit price €330,51 per l
In-house production
External manufacturing
Call us
Brands that already trust Cerakote
